Tool Control Foam Sheets and Rolls
We stock our premium quality mil spec tool control foam sheets and offer industry leading turnaround times. Our tool foam sheets are 6lb PE closed-cell foam that meets Federal Spec A-A-59135/59136(PPP-C-1752D). It is resistant to chemicals and solvents. If you would like a sample or our tool box foam rolls, tool control foam sheets, polyethylene foam rolls or industrial foam sheets please contact us, we have sample packages available for immediate shipment.
With us, you have lots of options:
Blue, black, red and yellow are available in 1/4” and 1/2” thickness in 4” x 9” sheets as well as 100′ or 200’ rolls.
Tool Box Foam Sheets
If you choose to do it yourself, we can guide you in the process with free instructions on how to achieve the best results for your tool control or lean manufacturing needs. These instructions make the process simple, in just a few quick steps you will have the tool control kit you need completed. The first step is cutting the foam to the size of your drawer, to do this we recommend using a straight edge or carpenter square and a utility or hot knife. Once you have the drawer size cut. We recommend tracing the tools in the locations within the drawer.
A simple guideline is maintaining ½” between each tool and the edge of the drawer. Use the utility knife, hot knife, or a hand router to cut the traced tools out. Once your cut outs are complete use a heat gun or spray adhesive to laminate the top ½” layer to the bottom ¼” layer.
Tool Foam Sheets
We can also cut the tool control foam sheets to your drawer size at no charge, this reduces shipping expense and makes doing it yourself easier. Our goal is to make cutting your tool foam, foam sheets for tool boxes, polyethylene foam sheets and tool foam sheets to fit your needs easy, we’re here when you need us!
|Foam Sizes & Colors|
||Fire Engine Red